BeltCorp Vector Belts

Introducing BeltCorp Vector, a new concept in wedge & vee belts.

Precision, Raw-Edge Cog, Wedge and Classical Vee Belts manufactured quickly to any length. Any Length, Any Time.


The BeltCorp Vector machine

Using a patented manufacturing process, Transeals can manufacture in-house standard section wedge and vee belts to any length required (standard or non-standard, popular or unusual).

Within around 24 hours Transeals can manufacture belts in pitch lengths between ~490mm and ~8500mm (lengths between ~8500mm and ~13,000mm may take longer). Vector belts liberate users from the constraints of shaft centre distances determined by off-the-shelf standard belt lengths. Vector belts also outperform conventional belts by up to 30%.

 

The Vector Production Process

The unique Vector Production Process enables Transeals to manufacture Vector belts to almost any length required. The process is precise and symmetrical, resulting in a product that is extremely consistent from belt to belt, and batch to batch.

Phase 1
The base component (compression section) is precisely measured to length and vulcanised on the Alpha machine.

Phase 2
The base component is transferred to the Beta machine and checked for accurate matching.

Phase 3
The tensile cord component is symmetrically wrapped around and vulcanised to the base.

Phase 4
The top component is wrapped around the tensile cords and the final vulcanisation process bonds the three components into one accurate homogenous belt.

Completion
The belt is now ready for use.

Watch the video (Requires Windows Media Player)